How to Make a Birdhouse Out of Old Wine Corks©
Posted: Monday, April 24, 2006
by Arlene Wright-Correll
http://www.learn-america.com
I had been saving wine corks for almost a year and when I had 112 of them plus 1 champagne cork I thought I would make a bird house out of these corks. I wanted this to be a totally recycled birdhouse made out of anything I had left over in my art studio or in our stained glass studio.
.jpg)
I started with some old " foam board that was left over from the backing when framing some of my paintings. I cut 2 pieces 6.5" x 7.5" for the front and back and 2 pieces 6.5" x 8.5" for the sides. I cut a 1.5" x 2" rectangle in the front piece for an entry.
I also cut 2 pieces 7.5" by 4" into triangles for the front and rear peaks. I then cut 2 pieces of foam board 4" by 8.5" for each side of the roof.
I cut some " by 4" and 7" for inside "reinforcing" braces out of the old foam board and two 1" by 4" pieces for my shutters.
I then cut a piece of old "birch panel into a 12 x 10" rectangle for a base for the birdhouse.
Using a glue gun, the first thing I did was to hot glue all the corks onto the each side and back and front. I tried to arrange these corks (and you must use stilled wine corks, not champagne) into some sort of design because 90% of these had the vineyards logos, designs, dates and names on them. Several had magic marker comments on them from our last Spain trip in 2005. I was almost finished when I discovered 112 corks were not enough. I needed another 10 or 12, so I went over to Bowling Green, KY to a liquor store that was having a wine tasting that afternoon and besides trying some lovely wine, they gave me the remaining corks I needed.
The next morning I again took up my task and when I finished gluing them on I then hot glued a front and side together and then hot glued in my reinforcing braces. I did the same to the back and a side. Then I hot glued all those pieces together to form a square. (I wished I had taken pictures of each of these steps. However, I did not.)
My next step was to find some old paint I had been using and paint the birch base. When that dried, I hot glued the corked rectangle to the base.
I discovered that this was just like building a house and oft times something goes a little amiss and that is why "trim" was invented. So I scrounged up some old hot dog roasting sticks (the long ones) and I was able to cut four 6.5" pieces out of one of them and I painted them with some contrasting old paint. When they dried, I hot glued them unto each corner of the house.
I then painted my front and rear roof pitch and my two pieces of foam board that was to be used for the shutters and when dried, I took some black India ink and drew in a window with shutters on the rear one and then took white India ink and a fine paint brush and painted "Vino Aerie" onto the front pitch. Upon the two shutters, using black India ink, I inked in shutter lines. (Wash out both brush and pen immediately to keep them from stiffening or building up with ink.)
When the shutters were dry I hot glued one to each side of the bird house opening.
I found it easier to work from the ground up at this point, so I hot glued two flat colored stones to the front for a walk way and I scrounged up a bunch of old flowers (I rarely throw anything away) that had been sitting in a basket in my art studio and I hot glued them on the birch base, around the bottom of the bird house as my "landscaping."
Under the opening, I hot glued a painted tooth pick for a foot grip for the bird in the event a bird ever even wanted to reside in this bird house.
At this point my front and back roof peaks were dried and I hot glued the front and one of the rooftops also hot gluing in some reinforcing braces. I then did the same to the back peak and one of the rooftops again hot gluing in some reinforcing braces. Then I put a line of hot glue underneath the whole length of the two rooftops and also hot glued in some reinforcing pieces of scrap foam board.
Next thing I did was to quickly put a big dab of hot glue on all 4 corners of the top of the building and on all four corners of the roof top, hold my breath and set the roof unto the building. It fit, but again I had some gaps that needed to be rectified with "trim". Out came the sheet rock knife and I cut two " x 6.5" strips of foam board and I used my scissors to cut in v-shaped cuts to make front and rear trim which I hot glued on the front and rear, thus reinforcing the connection and hiding any gaps or glue.
Now it was decision time as to what to do to finish off the roof. In the stained glass studio were a lot of old bottoms cut from beer and wine bottles, so I scrounged some of them and hot glued them on in random pattern to the foam board rooftop. I had to hot glue around each one on the outside since the cuts were uneven. Then I found some old flat colored pebbles with rounded tops and I hot glued them into the spaces between the bottle bottoms.
The last thing I did was to hot glue on a champagne cork for a chimney.
"Vino Aerie" was finished! Completely made out of whatever I had around the studio and the old corks. The only thing I had to buy was 3 bags of glue sticks. I took a lot of hot glue. This project took a total of 5 hours to make even with the wine tasting break and was spread out over two days. One has to work fast with the glue gun. One has to plan out everything and when the paint was drying I was hot gluing!
.jpg)
Here it is gracing the entry to our stained glass studio and giving color to our small world.
"Tread the Earth Lightly" and in the meantime may your day be filled with.Peace, light and love,
Arlene Wright-Correll
She is the author of many books which can be seen here http://stores.lulu.com/kate1031
Email askarlene@scrtc.com
This Article has been viewed 9,554 times. (Not updated in real-time.)
Top-level comments on this article: (1 total)There is someone in our area who has started making birdhouses with our corks. They are so cute!It is as much fun getting to the corks as it is making the bird houses since we do not buy corks but save them from the empty bottles of wine. It takes about 120 corks to make each birdhouse and I have made 3 so far.
We want your comments! If you can read this, you don't have javascript enabled, so you can't use this comment system. Please enable javascript.